BALDWIN TABLE LAMP
USER GUIDE
Please retain these instructions for future reference.
John Lewis Plc
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
30/03/2023
Product
information
• Indoor use only
• Dimmable - When used with dimmable bulbs
• Replacement bulbs should be the same type and rating, available from John Lewis
Partners or other established brands
• Clean the tting with a soft dry cloth. Do not use abrasive chemical cleaners as
this will damage the nish
Aftercare and
Troubleshooting
You’ve switched on the light, but it’s not working:
1. Check your power supply is switched on
2. Turn off the light and check that the bulb is inserted correctly
3. Check the bulb is still in working order
If your bulb is ickering, try adjusting the dimmer level. If the problem still persists,
consider sourcing a different quality brand of dimmable bulb.
If there are technical issues with this product that you can’t solve, please contact your
nearest John Lewis & Partners shop or call Technical Support on 03301 230106.
Specication
Max power: 6W
Recommended bulb:
1 x 6W E14 Golf LED bulb for maximim brightness.
Lower wattages are also available.
Rated input: 220 –240V, 50Hz
Bulbs not included
IP rating: 20
Weight: 1.52kg
5-year guarantee
At John Lewis & Partners we test every light to high quality standards.
That means we can offer you a 5-year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further
details contact your local council or visit www.recycle-more.co.uk.
Getting started
Thank you for purchasing this John Lewis & Partners product. For your safety,
and to make sure everything is working properly, please read the instructions
carefully before use.
Warnings
This is a Class ll product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
The lamp must be protected by a 3 amp fuse in the mains plug.
If you are in any doubt, please consult a qualied electrician.
For your safety, always switch off the supply before cleaning or adjusting.
If the mains cable becomes damaged it must only be replaced by a technically
competent, qualied person.
Always allow the product to cool down for 10 minutes before changing
the bulb or replacing the shade.
Parts list
Product assembly
Step 1
Refer to assembly drawing opposite. Carefully unpack
the carton, making sure all the parts are present
before assembly.
Step 2
Before plugging the lamp in, t the recommended bulb
as per the details overleaf.
Step 3
Plug the table lamp into the mains. Switch on
using the rotary dimmer switch. Your table
lamp is now ready for use. The angle
of the light can be adjusted by loosening
the adjustment key, changing the angle,
and then re-tightening the key.
Allow the shade to cool for
10 minutes prior to adjusting
the shade.
Note:
This product will only function
correctly with a dimmable bulb.
Description Image Quantity
Light tting x 1
Adjustment Key
Rotary Dimmer
Switch
