HITCH
RACK
FIT MEASUREMENT
RV
APPROVED
CLASS COMPATIBILITY
A B C D E
Class I Class II Class III Class IV
OnRamp
™
2" 3" Min. 5 ⁄" Max. 5 ⁄" Max.
10 ⭑
1.5" Min.
(40lbs./bike)
✓ ✓
OnRamp
™
1.25" 2" Min. 6 ⁄" Max. 5 ⁄" Max.
10 ⭑
1.5" Min.
◆
✓
HangOver
™
6 3" Min. 8" Max. 13" Max. 12" Min. 1.5" Min.
✓ ✓
HangOver
™
4 3" Min. 8" Max. 13" Max. 10" Min. 1.5" Min.
✓ ✓
BackSwing
™
2 ⁄" Min. 8 ⁄" Max. 6 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
Dr.Tray
™
1.25" 3 ⁄" Min. 6 ⁄" Max. 9" Max.
10 ⭑
2.375" Min.
✓
Dr.Tray
™
2" 2 ⁄" Min. 9" Max. 9 ⁄" Max.
10 ⭑
1.5" Min.
HoldUp
™
1.25" 2" Min. 9 ⁄" Max. 10 ⁄" Max.
10 ⭑
1.5" Min.
✓
HoldUp
™
2" 2 ⁄" Min. 9" Max. 9 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
HoldUp
™
1.25" 2" Min. 9 ⁄" Max. 10 ⁄" Max.
10 ⭑
1.5" Min.
✓
HoldUp 2" 2 ⁄" Min. 9" Max. 9 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
HoldUp EVO 1.25" 3" Min. 5" Max. 8 ⁄" Max.
10 ⭑
2.375" Min.
✓
HoldUp EVO 2" 3" Min. 5" Max. 8 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
SingleSpeed
™
1 ⁄" Min. 7 ⁄" Max 12" Max.
10 ⭑
2.75" Min.
◆
✓ ✓ ✓
FullSwing
™
3" Min. 8 ⁄" Max. 6 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
SwingDaddy
™
3" Min. 6 ⁄" Max. 6 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
FourTimer
™
2 ⁄" Min. 13 ⁄" Max. 14 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
TwoTimer
™
1 ⁄" Min. 12 ⁄" Max. 12 ⁄" Max.
10 ⭑
2" Min.
◆
✓ ✓ ✓
FullTilt
™
4/5 1 ⁄" Min. 9 ⁄" Max. 9 ⁄" Max.
10 ⭑
2.5" Min.
◆
✓ ✓ ✓
LongHaul
™
3 ⁄" Min. 4 ⁄" Max. 4 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓ ✓
RoadTrip
™
2 ⁄" Min. 4 ⁄" Max. 10 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
RidgeBack
™
2/4/5 1 ⁄ / 2 ⁄" Min. 9.25 / 8" Max. 10" Max.
10 ⭑
1.5" Min.
◆
✓ ✓
LiteRider
™
2/3 2 ⁄" Min. 9" Max. 9" Max.
10 ⭑
2.75" Min.
◆
✓ ✓ ✓
DoubleDown
™
2" Min. 9 ⁄" Max. 9" Max.
10 ⭑
2" Min.
◆
✓ ✓ ✓
StageTwo
™
1.25" 2 ⁄" Min. 6 ⁄" Max. 8 ⁄" Max.
10 ⭑
1.5" Min.
✓ ✓
StageTwo
™
2" 3" Min. 5 ⁄" Max. 8 ⁄" Max.
10 ⭑
1.5" Min.
(60lbs./bike)
✓ ✓
HangTight
™
6 3" Min. 8" Max. 13" Max. 12" Min. 1.5" Min.
✓ ✓
HangTight
™
4 3" Min. 8" Max. 13" Max. 10" Min. 1.5" Min.
✓ ✓
A
A
B
E
Edge of
Spare Tire
Interior
Backstop
Center of
Mounting
Hole
Bumper
Edge
FIT MEASUREMENT A
An obstacle inside or behind the hitch
can be present.
FIT MEASUREMENT E
Distance from edge of receiver to
center of mounting hole.
FIT MEASUREMENT B
Make sure the bumper will not
interfere with the Yakima hitch rack.
FIT MEASUREMENT C,D
A spare-tire may interfere with the
install of a rack.
⭑ Measurement D is a recommended minimum on this product. Using Yakima hitch mounted bike racks on vehicles
with a pinhole to ground distance less than the minumum recommended increases the risk of the bikes or rack striking
the ground while in use.
◆ Due to variations in Class I hitch receivers, some Class I receivers may not be able to accept this product. Please
refer to Fit measurement “A” to see if this product will work on your class I.
Attention: Receiver hitches vary in capacity. Please insure you check your vehicles owners manual for tongue weight
capacity prior to installing and useing a hitch mounted carrier. Your vehicle’s capacity must align with the Class require-
ments as stated in this table.
Center of
Mounting
Hole
Center of
Mounting
Hole
Center of
Mounting
Hole
Edge of
Receiver
Edge of
Spare Tire
Center of
Mounting
Hole
Level Ground
C
D