SLEEPWELL HEATED MATTRESS COVER

SLEEPWELL

HEATED MATTRESS

COVER

FITTING YOUR MATTRESS COVER TO THE MATTRESS

ATTACHING THE CONNECTOR

INTELLIHEAT CONTROL

9 10 11

OPERATING INSTRUCTIONS FOR USE

OF SLEEPWELL INTELLIHEAT MATTRESS COVER

Dear Customer, DREAMLAND would like to thank you for purchasing this product. We are

convinced that you will appreciate the quality and reliability of this appliance, which was

developed and manufactured with customer satisfaction always in mind.

These operating instructions were created based on the European standard EN 62079.

IMPORTANT INSTRUCTIONS

RETAIN FOR FUTURE REFERENCE

WARNING! Instructions and information for safe use.

Please read these instructions completely and in particular the safety

instructions before using your appliance and follow these instructions

carefully. Keep these instructions and the associated image section in

a convenient location for reference over the entire service life of your

appliance and be sure to include it if you pass the appliance on to another

user. Should certain parts of this booklet be difficult to understand or

should doubts arise, contact the company before using the product, at

the address indicated on the last page.

NOTE: should certain parts of this booklet be difficult to understand or should doubts

arise, contact the company before using the product, at the address indicated at the last page.

CONTENTS

SAFETY INSTRUCTIONS page 1

SYMBOL KEY page 3

POSITIONING AND FITTING INSTRUCTIONS page 3

USING YOUR BLANKET page 3

CLEANING AND MAINTENANCE page 4

STORAGE page 5

TROUBLE SHOOTING page 6

AFTER SALE ASSISTANCE page 6

REGULAR SERVICING page 7

ELECTRIC BLANKET SERVICE RECORD page 7

WARRANTY page 7

DISPOSAL page 8

DIAGRAMS I-II

SPECIFICATIONS I

SAFETY INSTRUCTIONS

• After unpacking, make sure that the appliance is intact with no visible

signs of damage caused during transport. Should you have any doubts,

do not use the appliance and return it to the authorized Service Centre.

• Packaging materials are not toys! Keep plastic bags away from

babies and small children as they pose a suffocation risk!

• Before connecting the appliance, check that the label specifications

correspond to the electrical mains supply; the rating is located on

the label stitched onto the appliance.

• This appliance must only be used as an heated mattress cover for domestic use

as indicated in the instructions. Any other use is to be considered hazardous.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensorial or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

Particularly do not use the intelliheat mattress cover with the infirm,

infants or persons insensitive to heat.

This appliance is not to be used by young children unless the controls

have been pre-set by a parent or guardian, or unless the child has

been adequately instructed on how to operate the controls safely.

NOT

to be used by very young children (0-3 years). Children under

the age of three are not to use this appliance due to their inability

to react to overheating.

DO NOT handle the control switch with wet hands.

DO NOT pull the power cord or the appliance to remove the plug from

the socket.

• Always disconnect the appliance from the mains supply before

carrying out any maintenance or cleaning.

• Should the appliance protection fuse break down and/or fail to work

properly, turn off the appliance and check the fuse, but do not tamper

with it. For any repairs, return it to the authorized Service Centre.

• If the supply cord is damaged, the control unit must be replaced by

the authorized Service Centre in order to avoid a hazard.

• The appliance must only be used with the type of controls which are

marked on the label of the appliance.

• Avoid placing the control switch below the pillow or between the

sheets or blankets when the appliance is connected.

• Examine the appliance frequently for signs of wear or damage. If

there are such signs or if the appliance has been misused, return in

to the supplier prior to any further use.

ATTENTION! It is recommended that people with pacemakers

do not use the heated bedding for all night use. It may be

used to preheat the bed but the heated bedding must be

switched off and un-plugged from the socket before going

to bed. Please check with the cardiologist.

ATTENTION! If the appliance is used on an adjustable bed,

check that the blanket and cord do not become trapped or

rucked, for example in hinges.

DO NOT tuck in.

This appliance is not designed for medical use in hospital.

DO NOT use if wet.

DO NOT allow pets on the appliance.

DO NOT use if folded or crumpled

DO NOT insert needles or pins

SYMBOL KEY

Protection class II / Double insulated

Forbidden

Caution Temperature selection

OFF position ON position

Stand by Timer selection

POSITIONING AND FITTING INSTRUCTION

POSITIONING THE MATTRESS COVER (Diagram [A])

ATTENTION! Place the blanket only within the mattress and

the sheet and not over people in bed.

Place the fitted mattress cover directly onto the mattress. Fit the blanket to the mattress

and turn the edges of the skirt under the mattress.

FITTING INSTRUCTION

Join the connector(s) (1) of the control unit to the connector (2) on the blanket. Ensure the

connector is pushed home until the locking catch engages. (Diagram [B])

USING YOUR BLANKET

Your Sleepwell Intelliheat mattress cover is designed to FAST PREHEAT your bed and it

also responds to temperature changes while you sleep.

The digital intelliheat control has 6 temperature settings (Diagram [C]):

Temperature laboratory tested following EN60335-2-17

* As set by the lasted European standards (EN60335-2-17 the max temp. for all night use cannot be higher than 37°C).

** The Temperature may very of ±10%.

• Connect the control connector into the blanket socket then plug into the mains supply.

See the Diagrams A & B.

• Switch on your the electric blanket, from the back of the control (8) see Diagram [C], by

positioning the switch ON ( I ) the temperature setting (6) Diagram [C] will default to the

last one used, providing it has been set to that number for a period longer than 8 minutes.

SET FAST PREHEAT: Press temperature button (6) Diagram [C] until number 6 is showing

on temperature display, this will show red. Never use on FAST PRE-HEAT setting 6 whilst in

bed. (Switch off or to a lower temperature setting , before getting into a bed).

SET ALL NIGHT USE: Press temperature button (6) Diagram [C] until your preferred temperature

setting 1-5 is showing on temperature display (3), this will show with an orange glow.

AUTO OFF FUNCTION: The blanket is fitted with an AUTOMATIC SHUT OFF timer which you

have the choice to select either 1 or 9 hours.

SET TIMER: Push timer button (5) Diagram [C] until either 1h or 9h is showing with a green light

(4) Diagram [C].

AUTOMATIC TIMER OFF: When the set time period has elapsed the blanket will be switched off and

the blue indicator light (7) Diagram [C] will show. The blue light may flash after the set time period has

elapsed, providing it works normally when switched off then back on again, the blanket can be continued

to be used. Once the control has automatically switched off, to switch the blanket on again you will need

to reset by first switching OFF (O) at the back and then switch ON again (I) (8) Diagram [C].

MANUAL SWITCH OFF BOTH BLANKET AND CONTROL: Switch (8) Diagram [C] to off (O) position.

MEMORY FUNCTION: After using your blanket for over 8 minutes, the intelliheat control will keep in

memory your last temperature setting.

DISCONNECT: To disconnect your electric blanket from the mains, switch the control to OFF position

(O) (8) (Diagram [C]), and then safely disconnect the plug from the main socket (Diagram [A]).

CLEANING AND MAINTENANCE

WASHING INSTRUCTIONS

The Sleepwell intelliheat mattress cover is suitable for washing.

WASHING

1. Prior to washing disconnect the control lead from the blanket, as in Diagram [B].

2. Before washing the mattress cover it is essential that you measure it, to ensure that

it is stretched to approximately its original size during the drying process.

MACHINE WASH

The mattress cover may be washed in a washing machine at 40° C on a wool

programme.

NEVER DRY CLEAN

Spin dry on wool programme only. DO NOT use an extra spin cycle.

HAND WASH

1. Use a mild washing powder or detergent and luke warm water to soak your mattress

cover for 15 minutes. After soaking, gently wash the throw and rinse thoroughly with

clean, lukewarm water.

2. Allow the excess water to drain from the mattress cover. It may also be gently

squeezed, but never wring the mattress cover.

DRYING

Tumble dry on low settings.

2. Air dry on a clothes line, but do not use clothes pegs on the wired area of the blanket

as they may damage it.

3. DO NOT use your mattress cover until it is completely dry.

NO BLEACH

Do not iron

STRETCHING

1. The mattress cover must be stretched back to approximately its original size during

the drying process. This is best done whilst damp, working from side to side, stretching

a strip at a time. This procedure may need to be repeated a few times until fully dry.

2. Inspect the mattress cover to ensure that none of the wires have formed into loops,

or become twisted back on themselves. Holding the mattress cover up to the light

will make it easier to inspect the wires.

3. If any problems with the wires persist after the stretching process, or the mattress

cover does not return to close to its original size, return it along with the control to

our Service Centre for a safety inspection.

STORAGE

When not in use store as follows:

ATTENTION! When storing the appliance, allow it to cool

down before folding.

ATTENTION! Avoid creasing the appliance.

ATTENTION! Do not place heavy items on the blanket when

in storage, as deep creases or folds may damage the wiring.

ATTENTION! Do not use any moth proofing chemicals.

TROUBLE SHOOTING

See the Diagram D9

See the Diagram D11

See the Diagram D10

SERVICE CENTRE

PO BOX 166 - Middlewich - Cheshire - CW10 0ZU - Tel: 01606 837 222

E-mail: [email protected]

www.dreamlanduk.co.uk

SERVICE CENTRE

PO BOX 166 - Middlewich - Cheshire - CW10 0ZU - Tel: 01606 837 222

E-mail: [email protected]

www.dreamlanduk.co.uk

This guarantee is offered as an extra benefit and does not affect your statutory rights as a

consumer. This guarantee does not confer any rights other than those expressly set out above

and in particular we shall not be liable for any indirect or consequential loss or damage.

Nothing in this guarantee or the instructions relating to the product excludes, restricts or

otherwise affects your statutory rights. In line with our policy of continuous development,

we reserve the right to change this product, packaging and documentation without notice.

If a defect appears and after checking that the blanket is being used properly in accordance

with t he i nstructions, return it with a valid p roof o f purchase, as soon a s possible to the

manufacturer’s Service Centre. This guarantee is valid in the UK only.

SERVICE CENTRE

PO BOX 166 - Middlewich - Cheshire - CW10 0ZU - Tel: 01606 837 222

E-mail: [email protected]

www.dreamlanduk.co.uk

MI001992

0515 (MMYY)

DISPOSAL

The product packaging consists of recyclable materials. Dispose of these in an

environmentally appropriate manner.

In accordance w ith EU directive 2002/96/EC, the appliance must be d isposed o f

properly at the end of its service life.

This involves t he r ecycling of v aluable substances contained w ithin t he appliance

and reduces the impact on the environment. For more information, contact your local

disposal company or the store where you purchased the appliance.