Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HEX BOLTM12 - 1.25 x 40 HEX21
WASHER7/1622
LOCK WASHER1/2"23
HEX NUTM12 - 1.2524
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
1,000 100
3
10
86-95 SUZUKI SAMURAI
1/20/2010
11277
20
217353
1. Locate the 2 1/2" wide steel step plate at the rear of the vehicle under the license plate. Notice two 12mm
threaded holes 4" apart in this plate.
2. This hitch will mount directly to the UNDERSIDE of this step plate on vehicle. Notice the placement of the
hitch and the fasteners in the diagram. 12mm nuts and lock washers supplied with the hitch are used on the
top side of the step plate as an additional locking feature.
3. Torque all 12mm fasteners to 65 lb-ft.
STEEL STEP PLATE
4
3
2
1
-NO DRILLING REQUIRED
